Advanced Search

Journal Navigation

Journal Home

Subscriptions

Archive

Contact Us

Table of Contents

Sign In to gain access to subscriptions and/or personal tools.
Textile Research Journal
This Article
Right arrow Full Text (OnlineFirst PDF)
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Add to Saved Citations
Right arrow Download to citation manager
Right arrowRequest Permissions
Right arrow Request Reprints
Right arrow Add to My Marked Citations
Citing Articles
Right arrow Citing Articles via Scopus
Google Scholar
Right arrow Articles by Liu, Y.
Right arrow Articles by Cheng, G.
Social Bookmarking
Add to CiteULike   Add to Complore   Add to Connotea   Add to Del.icio.us   Add to Digg   Add to Reddit   Add to Technorati   Add to Twitter  
What's this?

Article

Development and Filtration Performance of Polylactic Acid Meltblowns

Ya Liu1*, Bowen Cheng2, and Guoxiang Cheng3

1 School of Textile, Tianjin Polytechnic University, Tianjin, P. R. China
2 Tianjin Polytechnic University, Tianjin, P. R. China
3 School of Material Science And Engineering, Tianjin University, Tianjin, P. R. China

* To whom correspondence should be addressed. E-mail: liuya8353{at}163.com.


  Abstract

Polylactic acid (PLA) is a biodegradable material that can be used to make meltblowns (MBs, which are fabrics made by the meltblowing method) using direct melt spun. PLA MBs were successfully produced in a 20 cm laboratory meltblown line. The relationships between the processing parameters and the filtration performance of PLA MBs were explored in this study. The key parameters regarding the filtration performance of PLA MBs, including the PLA chip drying process, the melt temperature, the hot air temperature, and the width of the air gap, were thoroughly investigated using scanning electronic microscopy, filtration efficiency, and breathability tests. It was found that the processing parameters were significant to the structure, thus the filtration performance of PLA MBs. PLA turned out to be a favorable material for meltblowing. The preferred spinning temperature was 220°C for optimal web quality. The diameter of PLA MB fibers became larger with the increase of hot air temperature. With the increase of air gap width, the diameter of PLA MB fibers went up, whereas the crimp level went down. This information may be useful for the future development of a commercialized production line of PLA MBs.

First published on October 13, 2009
Textile Research Journal 2009, doi:10.1177/0040517509348332
Add to CiteULike CiteULike   Add to Complore Complore   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us   Add to Digg Digg   Add to Reddit Reddit   Add to Technorati Technorati   Add to Twitter Twitter    What's this?